Finding the best concrete cutting in Hastings matters when a job needs a clean doorway through a block wall, a core hole for plumbing, or sawn control joints in a new slab. Concrete cutting in Hastings covers floor sawing, core drilling, hand sawing, asphalt cutting and structural cut-outs for homes, builders and commercial sites across Hawke’s Bay. Operators such as Kev’s Concrete Cutting and Pro Cutters bring dedicated cutting and drilling gear to the job, while firms based at Whakatu and Napier South cover cutting as part of wider demolition and concrete work.
1Kev’s Concrete Cutting
Kev’s Concrete Cutting is a Napier-based concrete and asphalt cutting business, now run by Sam Devine, that works across Hastings, Havelock North, Taradale and Waipukurau. It handles floor and wall sawing, core drilling and cut-outs for residential and commercial projects, and suits builders, plumbers, electricians and homeowners who need precise openings or joints in existing concrete.
Services
- Walk-behind floor sawing up to 350mm deep, including expansion joints
- Core drilling from 10mm to 600mm diameter, hand-held or rig-mounted
- Concrete cut-outs for doors and windows
- Asphalt cutting for trenching, pothole repairs and sensor loops
- Stitch drilling for concrete thicker than 300mm
Highlights
- SiteWise Level 3 certified
- Over 20 years of industry experience
- Carries its own water supply for remote and rural sites
- Vacuum rig-mounted drilling that leaves no bolt holes
Location & Contact
Name: Kev’s Concrete Cutting
Address: Napier, Hawke’s Bay
Phone: 0800 288 4968
Website: kevsconcretecutting.co.nz
2Pro Cutters
Pro Cutters is a Hawke’s Bay concrete cutting and drilling company that has worked on commercial, industrial and residential jobs since 2006. Run by Shane, it takes on inside and outside work of any size and suits contractors who need cutting done outside normal business hours to keep a build on programme.
Services
- Concrete cutting
- Concrete drilling
- Indoor and outdoor cutting jobs
Highlights
- Cutting and drilling in Hawke’s Bay since 2006
- Available 24 hours a day, seven days a week for commercial and domestic work
- Day and night work for commercial projects on tight timeframes
Location & Contact
Name: Pro Cutters
Address: Hawke’s Bay
Phone: 027 448 1009
Website: procutters.co.nz
3JC Core Drilling
JC Core Drilling is a Hawke’s Bay core drilling specialist that drills through concrete, bitumen, brick and other hard surfaces. It provides drilling for local businesses and major construction companies, and suits plumbers, electricians and builders who need accurate penetrations rather than sawn cuts.
Services
- Core drilling for plumbing and electrical installations
- Holes for routing cables
- Holes for reinforcing bars, posts and anchor bolts
- Drilling through concrete tanks and pipes
Highlights
- Core drills up to 400mm in diameter
- Drills at angles up to 45 degrees
- Can supply water and power on site if required
- Fully insured
Location & Contact
Name: JC Core Drilling (2021) Limited
Address: Hawke’s Bay
Phone: 027 440 5084
Website: jccoredrilling.co.nz
4Hawkes Bay Demolition & Environmental
Hawkes Bay Demolition & Environmental, formerly Hastings Demolition, is a Whakatu-based demolition company whose services include concrete cutting and drilling alongside demolition, strip-outs and asbestos removal. Its cutting work covers wall and slab cutting and drilling for concrete breaking, which suits renovation, redevelopment and site clearance projects where cutting is one part of a larger job.
Services
- Concrete wall and slab cutting
- Drilling for concrete breaking and removal
- Openings for doors, windows and utilities
- Removal of damaged or unwanted concrete sections
- Foundation preparation for renovation or redevelopment
Highlights
- Working in Hawke’s Bay since the 1970s
- Dust control, noise reduction and vibration control on cutting jobs
- Demolition, asbestos removal and building strip-outs from the same team
- Active commercial projects from Waipukurau to Wairoa
Location & Contact
Name: Hawkes Bay Demolition & Environmental Ltd
Address: 94 Rangitane Rd, Whakatu, Hastings
Phone: 06 878 5200
Website: hbdemo.co.nz
5JTB Concrete
JTB Concrete is a Napier South concrete contractor, established in 2023, that offers concrete cutting across Hawke’s Bay including Hastings and Havelock North. Cutting sits alongside its slab, driveway and decorative concrete work, so it suits property owners and builders who want alterations or control cuts handled by the same contractor doing the wider concrete job.
Services
- Control cuts in new and existing slabs
- Cutting for alterations and extensions to existing concrete
- Access cuts for services and drainage
- Clean edge cuts around driveways, patios and pathways
Highlights
- Established in 2023
- Also provides earthworks and concrete sealing
- Handles slab projects up to approximately 800m2
Location & Contact
Name: JTB Concrete
Address: McGrath Street, Napier South, Napier
Phone: 022 426 4685
Website: jtbconcrete.co.nz
Concrete Cutting in Hastings at a Glance
| Business | Highlight |
|---|---|
| Kev's Concrete Cutting | SiteWise Level 3 certified |
| Pro Cutters | Cutting and drilling in Hawke's Bay since 2006 |
| JC Core Drilling | Core drills up to 400mm in diameter |
| Hawkes Bay Demolition & Environmental | Working in Hawke's Bay since the 1970s |
| JTB Concrete | Established in 2023 |
How to Choose the Right Concrete Cutting in Hastings
- Match the method to the job: floor sawing for slabs and joints, hand or ring sawing for wall openings, and core drilling for round penetrations.
- Check depth and diameter limits, especially for thick foundations or large pipe penetrations.
- Ask how dust and slurry will be controlled, particularly for indoor work in occupied homes or businesses.
- Confirm whether the contractor supplies its own water and power for rural or unserviced sites.
- For structural openings, ask whether an engineer’s sign-off or building consent has been sorted before cutting starts.
Frequently Asked Questions About Hastings Concrete Cutting
What does a concrete cutter do?
A concrete cutter uses diamond blades and drill bits to make precise cuts and holes in concrete, asphalt and masonry. Typical work includes sawing expansion joints in slabs, cutting doorways and windows into walls, removing sections of driveway and core drilling holes for pipes and cables.
How much does concrete cutting in Hastings cost?
Most concrete cutters price by the job after a site visit, based on the thickness of the concrete, the length of cut or number of holes, access and whether reinforcing steel is present. Many offer free quotes, so it pays to describe the job clearly and ask for a written price.
Do I need a building consent to cut an opening in a concrete wall?
Cutting a new opening in a load-bearing or structural wall can affect the building’s structure and may need an engineer’s design and a building consent. The Building Performance guidance on consents explains when consent is required, and Hastings District Council can confirm the requirements for your property.
Is concrete cutting dust dangerous?
Cutting and drilling concrete releases respirable crystalline silica, which can cause serious lung disease. Wet cutting, on-tool dust extraction and proper respiratory protection reduce the risk, and WorkSafe’s silica dust guidance sets out what contractors should be doing on site.
What is the difference between core drilling and concrete sawing?
Core drilling uses a hollow diamond bit to cut a clean round hole, ideal for plumbing, electrical and ventilation penetrations. Sawing uses a diamond blade to make straight cuts, used for joints, trenches, section removal and openings. Stitch drilling, a row of overlapping core holes, is used where the concrete is too thick for a saw.
Can concrete be cut indoors without fumes?
Yes. Petrol saws are usually kept for outdoor work, while indoor jobs use electric or hydraulic equipment that produces no exhaust fumes, combined with water to control dust. Ask your contractor which equipment they will use before work starts inside a building.
Where can I find concrete cutting near me in Hastings?
Most concrete cutting in Hastings is a mobile service, with crews travelling to residential, commercial and rural sites around the city. Some Hawke’s Bay operators are based in Napier and cover Hastings as part of their regular service area, so check the contractor’s stated coverage when you ask for a quote.
How We Chose the Best Concrete Cutting in Hastings
Every business in this guide was found by searching for concrete cutting in Hastings, then checked against what the business publishes itself: its own website, or where it has none, its official social or booking page. Names, addresses and phone numbers come from those pages rather than a directory feed, so what you see here is what the business says about itself. We also check that each one is still trading and is actually based in or genuinely serving Hastings, rather than a national operator running a local landing page. A business we can’t confirm from its own pages is not listed.